Table of Contents
Advertisement
MicroMAS Installation Guide
MicroMAS Recovery
(Note that the name and password are case-sensitive.)
then click Next.
7. Adjust appropriate date, time and time zone, then click Next. Set Auto adjust for Daylight
Savings Time if appropriate for this area.
8. Click Typical settings, then click Next.
9. Select No and enter WORKGROUP if the MicroMAS is not in any specific domain.
Note
10. Click on Finish when done.
The MicroMAS will restart as soon as the Windows Mini-setup is finished.
Step 1C: Activate Microsoft Windows license
1. Plug the LAN cable into the MicroMAS LAN connector. At this time internet access is required,
or you may choose to license the MicroMAS via a telephone conversation.
2. On the Windows Taskbar, double click on the Activation Key appearing in the System Tray
window.
3. Select Yes activate over the internet now or Yes I want to telephone a Customer Service
Representative.
4. Follow the prompts or instructions to activate the license.
Note
Step 1D: Setup Network Connections
The recovery software will automatically populate the information listed in this step. This information
can be retained or customer specific information can be entered.
1. Log on to the MicroMAS; click on Valued Customer and enter password as the password.
2. From the main menu select Start > Control Panel > Network and Internet Connection then
click on Network Connection.
3. Right click on the Local Area Connection for the Intel® PRO/1000 CT Network, and select
Properties.
4. Highlight Internet Protocol (TCP/IP) and click the Properties button.
5. Select Use the following IP address and enter the following:
a. IP Address: 192.168.254.252 (static address)
b. Subnet Mask: 255.255.255.0
c. Default Gateway: Blank
6. Click on OK.
END OF RECOVERY PROCEDURE
Post Recovery Procedure
The MicroMAS is now in its as shipped condition. Go to
To setup the SES and ACD refer to their manuals.
MicroMAS Software Backup
The files on the MicroMAS should be backed up on a regular basis. The backup files can be stored
on a network disk drive or another network device.
20
Note contact your network administrator for more information.
At this point the MicroMAS is in the "as shipped" condition. Data file, configuration files
and license files must be restored.
"MicroMAS Licensing" on page
Micro MAS Installation Guide
16.
4/07
Advertisement
Table of Contents
