Table of Contents
Advertisement
A Backup and Restore Utility is available for managing customer database information for all of the
applications on the MicroMAS. This utility is available for download, at no charge, on the Toshiba
FYI website. Product Bulletin PBCIX-0031 describing this utility and how to use it is also available
on the FYI website.
MicroMAS Modem Installation (Optional)
The MicroMAS can be accessed from a remote location via the network by using the Windows® XP
Remote Desktop feature. The MicroMAS can also be accessed via a dial-up connection after the
installation of the Zoom 3090 USB V.92 Modem (Toshiba part number SYS-USB-MODEM).
Zoom is a registered trademark of Zoom Telephonics, Inc.
Important!
Do not connect the modem to the USB until after the modem driver software has
been installed on the MicroMAS.
Step 1: Install Modem Driver Software on MicroMAS
Install the USB modem driver software before connecting the modem to the USB port on the
MicroMAS.
1. Insert the Zoom driver software CD-
ROM into the MicroMAS CD-ROM
drive. The CD-ROM auto-runs (shown
at right).
2. Select Install Modem Drivers.
3. Select USB Drivers.
4. Say no to all of the other software
components when prompted.
5. Reboot when prompted.
Micro MAS Installation Guide
The Zoom™/Modem V.92 USB Mini is a compact external modem
for Windows computers.
Physical Size
Power
Interface
Cables
Regulatory
Approvals
4/07
MicroMAS Modem Installation (Optional)
2.75 in. x 5.0 in. x 0.87 in.
(7.0 cm x 12.7 cm x 2.21 cm)
USB port powered
no batteries or AC adapters are required
Modem to MicroMAS: USB cable (included)
Modem to phone circuit: RJ-11 (NOT included)
FCC Parts 15B and 68
UL, C-UL, CE
MicroMAS Installation Guide
21
Advertisement
Table of Contents
