ABB SSC600 Operation Manual page 13

1MRS758850 C
1.3.1.1 Document conventions
• Abbreviations and acronyms in this manual are spelled out in the glossary. The
glossary also contains definitions of important terms.
• whmi menu paths are presented in bold typeface.
Select Main menu > Settings.
• whmi menu names are presented in bold typeface.
Click Information in the whmi menu structure.
• Parameter names are shown in
The function can be enabled and disabled with the
• Parameter values are indicated with quotation marks.
The corresponding parameter values are "On" and "Off".
• ied input/output messages and monitored data names are shown in Courier
font.
When the function starts, the START output is set to TRUE.
1.3.1.2 Symbols
Although the warning hazards are related to personal injury, it is necessary to
understand that under certain operational conditions, operation of damaged
equipment may result in degraded process performance leading to personal injury
or death. Therefore, comply fully with all warning and caution notices.
1.3.1.3 Functions, codes and symbols
All available functions included in the IED are listed in the tables below. Available
functions depend on the chosen product options.
SSC600
Operation Manual
A particular convention may not be used in this manual.
The warning icon indicates the presence of a hazard which could result in
electrical shock or other personal injury.
The caution icon indicates important information or warning related to
the concept discussed in the text. It might indicate the presence of a
hazard which could result in corruption of software or damage to
equipment or property.
The information icon alerts the reader of important facts and conditions.
The tip icon indicates advice on, for example, how to design your project
or how to use a certain function.
italics .
Operation setting.
Introduction
13