Selecting The Internal Fault Test - ABB SSC600 Operation Manual

Commissioning
1.
2.
3.
4.
5.
3.5.3

Selecting the internal fault test

The internal fault test can be activated by from the IED test view.
1.
2.
3.
4.
28
Select Tests > Function tests from the main menu structure.
Select the function test type from the main menu structure.
Enable parameter editing by selecting Enable Write
Select the test to be activated by changing the New Value field selection.
Select Write to IED
The selected test is now activated.
Select IED test from the main menu structure to activate the IED test view.
Figure 5: IED test view
Enable parameter editing by selecting Enable Write
Select the internal fault test by changing the New Value field selection.
Select Write to IED
The internal fault test is now activated.
to save changes into the IED's memory.
to save changes into the IED's memory.
1MRS758850 C
.
.
SSC600
Operation Manual