1MRS758850 C
3.5
Testing the IED operation
The IED has to be in the test mode before the digital outputs and certain output
signals of protection and other functions can be activated.
3.5.1
Selecting the IED test mode
The test mode can be activated by activating the IED test view. The test mode is
useful for simulated testing of functions and outputs without providing current
inputs.
1.
2.
3.
4.
3.5.2
Testing functions
Activate or deactivate an output signal for protection or other function to test the
function.
SSC600
Operation Manual
Select IED test from the main menu structure to activate the IED test view.
Figure 4: IED test view
Enable parameter editing by selecting Enable Write
Select the test mode to be activated by changing the New Value field selection.
Select Write to IED
The selected test mode is now activated.
to save changes into the IED's memory.
Commissioning
.
27