Using The Web Hmi - ABB SSC600 Operation Manual

1MRS758850 C
Table 9: Predefined users
Username
VIEWER
OPERATOR
ENGINEER
ADMINISTRATOR
4.1.2

Using the Web HMI

As secure communication is enabled by default, the WHMI must be accessed from a
Web browser using the HTTPS protocol. Log in with the proper user rights to use
the WHMI.
4.1.2.1 Logging in
1.
2.
3.
SSC600
Operation Manual
For user authorization for PCM600, see PCM600 documentation.
Controlling operations are only allowed via local connection for user with
Control Operation Right (refer to table Default roles-to-rights in the
Cyber Security Deployment Guideline), and never via remote connection.
To establish a remote WHMI connection to the IED,
contact the network administrator to check the company
rules for IP and remote connections.
Disable the Web browser proxy settings or make an
exception to the proxy rules to allow the IED's WHMI
connection, for example, by including the IED's IP address
in Internet Options > Connections > LAN Settings >
Advanced > Exceptions.
Open Internet Explorer.
Type the IED's IP address in the Address bar and press ENTER.
Type the username with capital letters.
User rights
Read only access
• Changing setting groups
• Controlling
• Clearing indications
• Changing settings
• Clearing event list
• Clearing disturbance records
• Changing system settings such as IP address, serial baud
rate or disturbance recorder settings
• Setting the IED to test mode
• Selecting language
• All listed above
• Changing password
• Factory default activation
IED operation
31