Network Settings Screen Details - Dell Precision 7920 Owner's Manual

Menu Item Description
This field enables or disables the boot option in UEFI Boot Sequence.
Boot option
Enable/Disable

Network settings screen details

You can use the Network Settings screen to set the Boot mode from UEFI. It also allows you to specify the boot order.
About this task
You can view the Network Settings screen by clicking System Setup Main Menu > System BIOS > Network Settings.
The Network Settings screen details are explained as follows:
Menu Item Description
This field controls the system network settings.
UEFI PXE
settings
This field controls the system network settings. Option is set to Enabled.
PXE Device1
This field controls the system network settings. Option is set to Disabled
PXE Device2
This field controls the system network settings. Option is set to Disabled
PXE Device3
This field controls the system network settings. Option is set to Disabled
PXE Device4
NIC interface used for this PXE device. Option is set to Enabled
PXE Device1
Settings
NIC interface used for this PXE device. Options are:
Interface
Intergrated NIC Port 1 Partition 1
Intergrated NIC Port 2 Partition 1
Intergrated NIC Port 3 Partition 1
Intergrated NIC Port 4 Partition 1
This field controls the PXE protocol used for PXE device. Options are IPv4 (set default) and IPv6
Protocol
Enables or disables PXE device. Options are Enabled and Disabled (set default)
VLAN
VLAN ID
Displays the VLAN ID
Displays the VLAN Priority
VLAN Priority
This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
UEFI HTTP
Settings
This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device1
This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device2
This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device3
This field enables the BIOS to create a UEFI boot option for the HTTP device. Option is set to Disabled
HTTP Device4
This field specifies the name of the ISCSI initiator (iqn format).
UEFI ISCSI
Settigns
This field specifies the name of the ISCSI initiator (iqn format).
ISCSI Initiator
Name
This field controls the configuration for ISCSI device.
ISCSI Device1
118 BIOS and UEFI