4. Lift the bracket and the processor away from the heat sink, and place the processor connector side down on the processor
tray.
5. Flex the outer edges of the bracket to release the processor from the bracket.
Ensure that the processor and the bracket are placed in the tray after you remove the heat sink.
NOTE:
Installing processor into processor heat sink module
Steps
1. Place the processor in the processor tray.
Ensure that pin 1 indicator on the CPU tray is aligned with the pin 1 indicator on the processor.
NOTE:
2. Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on the bracket.
Ensure pin 1 indicator on the bracket is aligned with the pin 1 indicator on the processor before placing the
NOTE:
bracket on the processor.
46
Disassembly and reassembly