Table of Contents
Advertisement
2. Lift the latch till the system cover slides back and the tabs on the system cover disengage from the slots on the system.
3. Hold the cover on both sides, and lift the cover away from the system.
Installing system cover
Prerequisites
1. Ensure that all internal cables are routed correctly and connected, and no tools or extra parts are left inside the system.
Steps
1. Align the tabs on the system cover with the slots on the system.
2. Push the system cover latch down.
3. Using a flat head screwdriver, rotate the latch release lock clockwise to the locked position.
Next steps
1. Reconnect the peripherals and connect the system to the electrical outlet.
2. Turn on the system, including any attached peripherals.
Optical drive
Removing optical drive
Prerequisites
1. If installed, remove the front bezel.
2. Remove the system cover.
Steps
1. Disconnect the optical drive cable from the optical drive.
2. Press the blue latch and slide the optical drive from the system.
30
Disassembly and reassembly
Advertisement
Table of Contents
