Table of Contents
Advertisement
Running the Embedded System Diagnostics from the Dell Lifecycle
Controller
Steps
1. As the system boots, press F10.
2. Select Hardware Diagnostics → Run Hardware Diagnostics.
The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. The diagnostics
starts executing the tests on all the detected devices.
System diagnostic controls
Menu
Description
Displays the configuration and status information of all detected devices.
Configuration
Displays the results of all tests that are run.
Results
Provides the current overview of the system performance.
System health
Displays a time-stamped log of the results of all tests run on the system. This is displayed if at least one
Event log
event description is recorded.
132
Troubleshooting your system
Advertisement
Table of Contents
