6
The FR-A800-GN will appear on the screen once it is detected. Click [Close with Reflecting the
Setting] to close the window. (The FR-A800 will appear as the FR-A800-GN when it has the FR-
A8NCG installed.)
Checking communication
The following table shows the status of the LEDs when communication is established between the programmable controller
and the inverter.
RUN
LINK1
ON
Blinking
The LED on either LINK1 or LINK2 will blink depending on the port (port 1 or 2) the Ethernet cable is connected to.
LINK2
CC-LINK IE TSN CONFIGURATION
4
1
31