Remote Register (Inverter (Fr-A8Ncg) To Master Module) - Mitsubishi Electric CC-Link IE TSN FR-A8NCG Instruction Manual

7.3.2

Remote register (inverter (FR-A8NCG) to master module)

 Remote register definition
Device
Signal
No.
RWr0 Reply code
RWr2 Reply code
RWr4,
RWr5, Reply code
RWr6
76
Details of remote input and output signals
When "1" is set in RY21 or RY22, the following reply codes are set for the frequency setting
command. The setting value "0" is set normally, and a value other than "0" is set at an error.
Value
H0000 Normal
H0001 Write mode fault
H0003 Setting range fault
When "1" is set in RY23 or RY24, the following reply codes are set for the torque command / torque
limit. The setting value "0" is set normally, and a value other than "0" is set at an error.
Value

H0000 Normal
H0003 Setting range fault
When the PID command (RWw4 to RWw6) is set, the following reply code is set for the PID
command. The setting value "0" is set normally, and a value other than "0" is set at an error.
Value
H0000 Normal
H0003 Setting range fault
Description
Description
Description
Description