Table of Contents
Advertisement
7.3.4
Monitor codes
Information about the inverter can be monitored by setting the special monitor selection No. of the instruction code and monitor
code using the remote registers, RWw26 to 2F.
NOTE
• The monitor codes (monitor items) are the same as those of the RS-485 communication dedicated monitor.
For the details of the monitor code and monitor description, refer to the section of the monitor display in the Instruction
Manual (Detailed) of the inverter.
• When the remote registers RWw26 to 2F are used for monitoring, H01 (output frequency) and H05 (set frequency)
always indicate the frequency regardless of the settings of Pr.37, Pr.144, and Pr.811. (Pr.811 is only available for the
FR-A800 series.)
Details of remote input and output signals
7
83
Advertisement
Table of Contents
