Sharp MAX-PRO 1182 Operator's Manual page 21

JOB SETUP SCREEN - BAG OPENING
Any changes made to this screen requires operator to press 'Load Job' button.
BAG OPENING
Bag Opening Retry Count: Display the number of attempts Bag Opening Fingers try open bag before
JAW PASS-THRU
Pass-Thru: Sets Pass-thru, will change (move) once job is loaded.
LOW PRESSURE AIR - Press box in middle to set timeout for LPA at end of cycle to hold bag open.
Always OFF: Always OFF
Always ON: Always ON
HIGH PRESSURE AIR
HP Air Dwell: Sets the length of time, in seconds, the High Pressure Air blasts.
VACUUM
Vacuum Dwell: Sets the length of time, in seconds, that Vacuum creates suction.
MAX-PRO Operator Manual
SCREEN NAVIGATION
feeding new bag out.
SECTION 2 - CONTROLS
2-7
Original Printed in English