Table of Contents
Advertisement
SERVICE SCREEN - SEAL BAR
Move IN: Pressing button will retract Seal Bar.
Move OUT: Pressing button will extend Seal Bar. Seal Bar will remain out until Move IN button is
pressed.
CYCLE
Current: Displays the length of time Seal Bar is active.
Pulse Sec.: Cycles the Seal Bar. There must be a time set in Job Settings, Current or Seal Bar will not
move.
Setting: Displays the Job Setting for temperature.
SEAL BAR CYCLES
Total: Number of completed Seal Bar Cycles since last reset.
Reset Counter: Resets the Seal Bar Cycles Counter.
MAX-PRO Operator Manual
SCREEN NAVIGATION
2-23
SECTION 2 - CONTROLS
Original Printed in English
Advertisement
Table of Contents
