Huawei TaiShan 200 Product White Paper page 17

TaiShan 200 Server
White Paper (Model 2180)
Table 4-6 Description of SAS/SATA drive indicators
Drive Activity
Indicator (Green
Indicator)
Steady on
Blinking at 4 Hz
Steady on
Blinking at 1 Hz
Off
Steady on
FlexIO
For details about FlexIOs supported by the server, see the
Compatibility
The following figure shows the indicators on the FlexIO.
Figure 4-7 TM210 four GE electrical ports
Table 4-7 FlexIO indicators
NIC Type
FlexIO with four
GE electrical ports
Issue 02 (2020-06-22)
Drive Fault
Indicator (Yellow
Indicator)
Off
Off
Blinking at 1 Hz
Blinking at 1 Hz
Steady on
Steady on
Checker.
Indicator
Data transmission
status indicator
Connection status
indicator
Copyright © Huawei Technologies Co., Ltd.
4 Hardware Description
Description
The drive is in position.
Data is being read or written normally,
or data on the primary drive is being
rebuilt.
The drive is being located by the RAID
controller card.
The data on the secondary drive is
being rebuilt.
A member drive in the RAID array is
removed.
A member drive in the RAID array is
faulty.
Intelligent Computing
State Description
● Blinking yellow: Data is being
transmitted.
● Off: No data is being transmitted.
● Steady green: The network port is
properly connected.
● Off: The network port is not
connected.
14