Operation; Powering Up The Monitor; Displays And Controls; Membrane Key Functions - ABB AV410 User Manual

2 OPERATION

2.1 Powering Up the Monitor

Warning. Ensure all connections are made
correctly, especially to the earth studs – see Section 6.5.
1) Ensure the input sensor(s) is (are) connected correctly.
2) Switch on the power supply to the transmitter. A start-up
screen is displayed while internal checks are performed;
then the Operating Page (Section 2.3) is displayed as the
dissolved organics measuring operation starts.
2.2 Displays and Controls – Fig. 2.1
The upper and center display lines each comprise a 4
7-segment digital display that shows the actual value of the
measured parameter and alarm set points, followed by a
6-character dot matrix display showing the associated units.
The lower line is a 16-character dot matrix display showing
operating and programming information.
Upper Display Line
Center Display Line
Lower Display Line
Alarm LEDs
Membrane Keys
Menu Key
Sidescroll Key
Downscroll Key
Up Key
Down Key
Fig. 2.1 Location of Controls and Displays
1 /
2
1. 2 5
mg/l C
10. 2 5
mg/l C
Diss. Organics
2.2.1 Membrane Key Functions – Fig. 2.2
Advance to
next menu
A – Moving Between Menus
Page 1
Frame 1
digit,
Frame 2
Frame 3
Frame 4
B – Advancing to Next Page
Advance to
next frame
C – Moving Between Frames
Parameter Value
D – Adjusting and Storing a Parameter Value
Parameter X
E – Selecting and Storing a Parameter Choice
Fig. 2.2 Membrane Key Functions
Menu 1
Menu 2
Advance to
next page
Page 2
Frame 1
or
Frame 2
Frame 3
For majority
of frames
Page X
Frame 1
Frame 2
Frame 3
Frame 4
Adjust
New value is
stored automatically
Y
Select
Z
New value is
automatically stored
3