Table of Contents
Advertisement
...2.3 Operating Page
2.3.2 Dual Input Dissolved Organics
1. 2 5
H
1. 2 5
H
Diss. Organics
10. 2 5
mg/l C
10. 2 5
mg/l C
Diss. Organics
Sen. A
Yes
-----
No
Lamp Disabled
Sen. B
Yes
-----
No
Lamp Disabled
Sen. A
Yes
-----
No
Manual Clean
Sen. B
Yes
-----
No
Manual Clean
Measured Values in Inferred Units
Sensor A reading in inferred units, e.g.
in Section 5.3.
Sensor B reading in inferred units.
Note. If
(see below) is set to
Lamp Disabled
display line and no values are displayed.
–1
Equivalent Values in mgl
Sensor A.
Sensor B.
Note. If
(see below) is set to
Lamp Disabled
display line and no values are displayed.
Disabling the Lamp – Sensor A
UV
Warning. Disable the lamp before performing any maintenance on the sensor –
see also
on page 2.
Warning
is selected, Lamp Disabled is shown in the lower display line.
If
Yes
Disabling the Lamp – Sensor B
UV
Warning. Disable the lamp before performing any maintenance on the sensor –
see also
on page 2.
Warning
is selected, Lamp Disabled is shown in the lower display line.
If
Yes
Manual Cleaning – Sensor A
Select
to initiate the Sensor A cleaning system.
Yes
Manual Cleaning – Sensor B
Select
to initiate the Sensor B cleaning system.
Yes
See Section 3.1.
VIEW SETPOINTS
See Section 4.2.
SENSOR CAL
A3: Type set to Wash (Section 5.4.) – See Section 2.3.3.
WASH FUNCTION
A3: Type not set to Wash (Section 5.4.) – Return to the top of the page.
Diss. Organics
. For units available, refer to
Colour (°H)
, Lamp Disabled is shown in the lower
Yes
, Lamp Disabled is shown in the lower
Yes
2 OPERATION
Inferred Units
7
Advertisement
Table of Contents
