7 Setting and procedure for operation
QE81WH
7.2 Procedure for operation
Start
Attaching the module
Attach QE81WH to the specified base unit. (Refer to
section 7.4.)
Wiring
Wire QE81WH for external device. (Refer to section
7.5.)
Setting the intelligent function of module switch,
Initial setting
Perform settings using GX Works2 (Refer to section
7.6.)
Perform settings using GX Developer (Refer to section
7.7.)
Programming, debugging
Create and check the sequence program.
Figure 7.2-1 Procedure for operation
7 - 2