Mitsubishi Electric Melsec Q Series User Manual page 13

2 System configuration
Attachable CPU Module
CPU Type
Programmable High-speed
controller Universal model
CPU QCPU
C Controller module
(b) When mounted with MELSECNET/H remote I/O station
The table below shows the network modules applicable to the QE81WH and the
number of network modules to be mounted.
Depending on the combination with other modules or the number of mounted
modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if the
power supply capacity is insufficient, change the combination of the modules.
Applicable Network Module
QJ72LP25-25
QJ72LP25G
QJ72BR15
(c) The base unit can be mounted
QE81WH can be installed to any I/O slot of main base unit and extension base
unit.
*1 In case of redundant CPU, can be mounted to the extension base unit only.
Mounted to the main base unit is not allowed.
*2 Limited within the range of I/O points for the CPU module.
(2) For multiple CPU system
The function version of the first released CT input module is C, and the CT input
module supports multiple CPU systems.
When using the CT input module in a multiple CPU system, refer to the following.
*QCPU User's Manual (Multiple CPU system)
CPU Model
Q03UDVCPU
Q04UDVCPU
Q06UDVCPU
Q13UDVCPU
Q26UDVCPU
Q04UDPVCPU
Q06UDPVCPU
Q13UDPVCPU
Q26UDPVCPU
Q06CCPU-V
Q06CCPU-V-B
Q12DCCPU-V
Q24DHCCPU-LS
Q24DHCCPU-V
Q26DHCCPU-LS
Number of modules
2 - 2
QE81WH
Remarks
Attachable
quantity.
64
64
Remarks
64