Engine Controls - Toro GreensPro 1260 Operator's Manual

Hide thumbs Also See for GreensPro 1260:
Table of Contents

Advertisement

pedal, the machine moves to the left. The further you press a
pedal, the faster your speed in that direction.
Note: Come to a full stop before changing the direction
of the machine; do not abruptly change the pedal direction.
Doing so overstresses the traction drive line, resulting in
premature failure of drive-line components. Actuate the
pedals slowly and smoothly to avoid potential turf scuffing
damage as well as drive-line component damage.
When operating the machine on hills, ensure that the drive
roller is on the downhill side for adequate traction. Failure to
do so may result in turf damage.
Hitch Assembly
Use the hitch assembly
(Figure
lower/raise the transport wheels.
Seat-Adjustment Lever
You can move the seat forward or backward. Rotate the
seat-adjustment lever
(Figure
forward or backward, then release the lever.
Armrest-Adjustment Bolts
You can adjust each armrest by turning the respective
adjustment bolt
(Figure
13).
Figure 13
1. Adjustment bolt
Light Switch
Use the light switch to turn the lights on and off
Hour Meter
The hour meter
(Figure
10) indicates the total hours of
machine operation.
10) to tow the machine and to
10) upward and slide the seat
(Figure

Engine Controls

On/Off Switch
The On/Off switch
machine to start and shut off the engine. This switch is
located on the front of the engine. Rotate the On/Off switch
to the O
position to start and run the engine. Rotate the
N
On/Off switch to the O
OFF
1
1. O
position
FF
Choke Lever
The choke lever
(Figure
engine. Before pulling the recoil-start handle, move the choke
lever to the
CLOSED
move the choke lever to the
the choke if the engine is already warmed up or if the air
temperature is high.
1
10).
1. Choke lever
2. Fuel-shutoff valve
16
(Figure
14) allows the operator of the
position to shut off the engine.
FF
2
Figure 14
2. O
position
N
15) is required when starting a cold
position. Once the engine is running,
position. Do not use
OPEN
2
3
Figure 15
3. Throttle lever
OFF
G021 103
G019815

Advertisement

Table of Contents
loading

This manual is also suitable for:

44913

Table of Contents