Replacing The Warning Decal; Removing The Machine From The Pallet - Toro GreensPro 1260 Operator's Manual

1
2
1. Hitch pedal
7. Insert the locking pin
8. Torque the lug nuts on the transport wheels to 108
N∙m (80 ft-lb).
3

Replacing the Warning Decal

Parts needed for this procedure:
1 Warning decal
Procedure
On machines requiring CE compliance, replace the warning
decal (Part Number 133-1701) with the CE warning decal
(Part Number 133-1702).
Figure 8
2. Locking pin
(Figure 8).
4
Removing the Machine from
the Pallet
No Parts Required
Procedure
1. Remove the wood blocks at the hitch end of the pallet.
G024197
1
1. Wood blocks
2. Place some wood boards on the ground at the end of
the pallet.
Note: The height of the wood boards should be
slightly lower than the pallet. You can use pieces
removed from the sides and/or ends of the crate.
3. Carefully roll the machine off the pallet, onto the wood
boards, and then to the ground.
Important: Ensure that the rollers do not contact
the pallet as the machine drops to the ground.
4. Remove any remaining packaging.
13
Figure 9
G024330