GE JungleMUX SONET Technical Practice page 110

The following frames will be allowed to egress a Q-Trunk /
Q-Access port:
- Tagged frames that were ingressed at remote ports with matching
D-PVLAN membership AND whose (outer) QVLAN ID is matching
one of the listed QVLAN memberships.
- Untagged frames that were ingressed at remote ports with
matching D-PVLAN membership AND whose source port‟s
Default QVLAN ID is matching one of the listed QVLAN
memberships.
Output Tagging (per QVLAN)
Applies to the frames that are egressing this port (and belonging to the
given QVLAN). Can be set to one of the following options:
No Change
Tag 58
Untag 59
Clear QVLAN Memberships
Clears all assigned QVLAN memberships for this port.
Note: This action cannot be undone.
57
Default for Q-Access ports where both untagged and tagged frames are allowed to ingress.
Default for 1* on Q-Trunk ports.
58
Default for Q-Access ports where only tagged frames are allowed to ingress. Default for
QVLAN entries #2-50 on Q-Trunk ports.
59
Forced for Q-Access ports where only untagged frames are allowed to ingress. Not applicable
to Q-Access ports where only tagged frames are allowed to ingress. Not applicable to QVLAN
entries # 2-50 on Q-Trunk ports.
Copyright  GE Multilin Inc. 2010-2012
57
The frames are outputted unchanged with respect to the
far-end source port.
The frames that were untagged at the far-end source port
are outputted tagged with the source port‟s Default
QVLAN ID and Default Priority.
The frames that were tagged at the far-end source port
are outputted unchanged.
The frames that were tagged at the far-end source port
are outputted with the (outer) Q-tag removed.
The frames that were untagged at the far-end source port
are outputted unchanged.
342-86400-498PS
Issue 1.2
April 2012
Page 110