Setup Cd-Rom - Panasonic BB-HCM381A Service Manual

7. CONNECTING YOUR NETWORK CAMERA
7.1. PREPARATION
Prepare the following before connecting the Network Camera.
- PC to fulfill the system requirements.
SYSTEM REQUIREMENTS
The PC (Personal Computer) and the network must meet the following technical specifications for the
Network Camera to work properly.
Item
Operation System
Network Protocol
Interface
Web Browser
Note:
Pentium II 300 MHz or greater CPU is recommended to prevent performance degradation.
- Ethernet switching Hub or wireless Router for LAN Connection.
- Ethernet cable (two pieces of Category 5 straight cable, or a piece of
Category 5 cross cable).
- Setup CD-ROM
The setup program simplifies Network Camera installation. Adobe
Acrobat Reader 4.05 or later enables you to see the Operating
Microsoft Windows 98SE operating system
Microsoft Windows 2000 operating system
Microsoft Windows Me operating system
Microsoft Windows XP operating system
TCP/IP network protocol installed. (HTTP, TCP, UDP, IP, DNS, ARP, ICMP)
10/100Mbps Ethernet card for your network connection
Internet Explorer 6.0 or later
(Not included on the Setup CD-ROM).
Description
15