Panasonic BB-HCM381A Service Manual page 16

Instructions on the Setup CD-ROM. If Adobe Acrobat Reader is not
installed on the PC, double-click "ar405eng.exe". Refer to
"ReadmeEng.txt" for the directory and file structure ofthe Setup CD-
ROM.
Note:
- Do not scratch, smudge, write or label either surfaces of the Setup CD-
ROM. Setup CD-ROM may have a scratch on the surface.
- Do not leave the Setup CD-ROM in direct sunlight, near a heat source or
in a hot automobile as the Setup CD-ROM may become unreadable.
- Do not use chemicals or cleanser to clean the Setup CD-ROM as the
Setup CD-ROM may become unreadable.
The display color quality
To insure the images you are viewing are the best they can be, set the Display property setting (color
quality) to 24 bit or highher. Follow the next steps.
1. Close all applications so that you are looking at the Windows desktop.
2. Right-click an open portion of the desktop.
3. Select [Properties], [Setting] tab, and set [Color Quality] (Colors/Color
Pallet) to the highest selection possible.
Note:
Optimum video viewing will be seen when the color quality is set to 24bit or higher. This change should
not cause any problems with other applications on your PC.
7.2. CONNECTING THE NETWORK CAMERA
When checking the operation of the network camera, set up a configuration to be either of the two
connecting patterns described below. For a configuration to be set up when connecting to the Internet,
refer to the Operating Instructions.
Use Category 5 cross cable when connecting directly to the PC.
7.2.1. Wired Connection
16