Panasonic BB-HCM381A Service Manual page 72

Changes may be necessary to accommodate new operating systems or new web browsers that are not
shown on Operating Instructions. In those cases, Update Firmware would be available from the Network
Camera Technical Support Site at http://panasonic.co.jp/pcc/en/. Check the current firmware version on
Operating Instructions.
Note:
- Do not turn off the power during Update Firmware. If the operation of
Update Firmware is stopped, refer to Operating Instructions.
- Buffered Images are erased when performing Update Firmware.
The upgrade of the software for application is practiced to rewrite Flash memory (IC101) on the Main
board by CPU (IC103) on the Main board.
And the upgrade of the software for Camera is practiced to set CPU (IC902) on Video board to Boot
mode, and to rewrite Flash ROM in CPU (IC902) by way of serial interface by CPU (IC103) on the Main
board.
12.16.2. Firmware Trouble Shouting
When update missed.
When Update Firmware is interrupted by power off, or for network troubles and other problems, follow
the procedure below.
72