kinds of thin film filters, use the provided filter mount. To make a slip-in filter with the desired optical
characteristics, follow the procedures below.
To use a slip-in filter, insert i into the Light Box filter slot. It is possible to insert 7 slip-in filters at a time
into the filter slot.
<How to Make a Slip-in Filter>
1. Cut the desired optical filter to 45mm~45mm.
2. Remove the seal at the rear of the filter mount,stick the
optical filter in the filter mount (over the hole), then fold
the filter mount in half.
3. It is recommended that you write the filter factor on the
filter mount.
Kind of Chart and Filter (Spare parts rout)
11.4. LENS ADJUSTMENT PROCEDURE
Lens Adjustment consists of 2 items below:
- Iris Adjustment
- Zoom Trucking Adjust
Lens Adjustment Program has adjustment modes of individual items and an automatic adjustment
mode which adjusts successively the all items.
(1) Start-up the HCM CAMERA Service Tool.
(2) Select Model No. BB-HCM381A.
(3) Power on the BB-HCM381A.
1. Iris Adjustment
Equipment
- None
Procedure
1. Connect the Set from PC through LAN.
44