Panasonic BB-HCM381A Service Manual page 87

operation, phase current from a motor driver is enlarged, and while not operating, it is controlled to
lessen (C-CONT).
(At the time of operation: C-CONT='L', At the time of stop: C-CONT='H')
15.7. SD CARD BLOCK
When playing sounds, the data written on the SD Card are read out by the SD Card Controller (IC303)
and divided into IP Packets in the ASIC (IC103) to be sent to the LAN.
When recording sounds, the JPEG-compressed image data at the ASIC (IC103) are written on the SD
Card by the SD Card Controller (IC103) through the SD Card connector.
15.8. MAIN PART POWER SUPPLY BLOCK
The power block generates power supply to be used in each part.
87