1-7. SPURIOUS SIGNALS TEST (10 MHz to 22 GHz
pecification
SPURIOUS SIGNALS
(Expressed in dB relative to the
carrier level (dBc) at ALC level of
0 dBm)
(up to max. output freq.)
Subbarmonics and multiples
thereof (up to max. output freq.)
Power line related and spurious due to fan rotation within 5 Hz below line frequency, and multiples
thereof (CW mode only, all power levels)
STANDARD INSTRUMENT
Offset <300 Hz from carrier
Offset 300 Hz to 1 kHz from
carrier
Offset> 1 kHz from carrier
1. Band 4 applies to HP 83400 only.
)escription
~he HP 8340B/41B RF output signal is displayed on a spectrum analyzer to verify that the harmonic and non-
armonic spurious signals are at or below the specified level.
TYPE N
(in)
(2 required if DUT is HP 8341 B)
APC 3.S (f) to APC 3.5 (f)
(1 required if DUT is HP 8340B)
HP 8340B/41B
(10 MHz to 200Hz
Table 4-16. Spurious Signals Test Specifications
<35
<50
<-50
<-60
<-65
HP 8340B only)
-
HP 8341B)
-
Band 1
Band 2
7.0 to <13.5
<35
<35
<-25
-
<70
<-64
<-50
<-44
<-60
<-54
<-65
<-59
Band 3
Band 41
13.5 to <20.0
20.0 to 26.5
<-35
<-35
<-25
<-20
<60
<-40
<-38
<-50
<-48
<-55
<-53
HP 8566B
Performance Tests
4-37