How To Attach The Adapter On Your Server - NEC 1000BASE-T Manual

English Edition(英語版)
2

How to attach the adapter on your server

1. Shut down and turn off the CPU blade where you are going to insert the card.
2. Remove the CPU blade from Blade Server Assemble Unit.
3. If any other PCI boards are attached to the CPU blade, remove them all from CPU blade and
PCI riser card.
4. Place the CPU blade on an anti-static clean sheet.
5. Attach the PCI riser card that comes with this product into CPU blade.
Insert the connector all the way seated.
6. Attach the adapter itself to the PCI connector of PCI riser card that has been attached to CPU
blade. Insert the connector all the way seated.
Before attaching the adapter, you have to do the followings.
For details, see Chapter 4 "Installing driver and setting up adapter" on
page 44.
・To update the onboard LAN driver
・To remove Intel PROSet
®
For basics on how to handle the blade server mechanism, see
User's Guide that come with CPU blade and Blade Server
Assemble Unit.
Caution. Hot
Components in the server are hot to the touch when and after you
turn off the server. Use care until it becomes cool before you
remove the cover.
N8403-012 1000BASE-T Adapter(2ch)
Warning
42
- -