Table of Contents
Advertisement
4 - 2
Unpacking
General
NOTE
Workstation
The workstation is packed in a card board box which also contains technical
documentation and CDs for application software and operating system
Biopsy controller, miscellaneous
The biopsy controller is packed in a card board box together with cables, miscellaneous
installation material.
CCD camera
CAUTION
The CCD camera is packed in an attaché case. Keep the case for future use.
Optional equipment and update kits
If optional equipment and/or update kits are ordered, these are packed in separate boxes.
*. Only needed if a software reinstallation is necessary (see MAMMOMAT 1000/3000/3000 Nova - Opdima? Service
Instructions). Store the documentation and software CDs in a proper place for future service use.
Opdima?
Installation
Follow the directional marks on the box during transport, storage
and unpacking.
The CCD camera is very sensitive to mechanical shocks and tem-
perature changes. In the camera shock and temperature sensors
are integrated.
Risk of damaging the equipment.
The camera has to be handled with extreme care.
When disconnected from the biopsy controller, the camera shall
always be stored in the attaché case delivered with the system.
Do not touch the pins in the contacts of the camera.
Register 3
SPB7-230.033.10
Rev. 03
Preparatory work
Page 2 of 2
08.02
SPS-UD
4
4
4
*
.
4
4
Siemens-Elema AB
Solna, Sweden
Advertisement
Table of Contents
