Before Initial Use - Silvercrest SEF3 2000 C4 Operating Instructions Manual

WARNING! RISK OF FIRE!
Do not use an external timing switch or a separate remote
►
control system to operate the appliance .
Never melt solid fat (fat in blocks) in the deep fat fryer . Due
►
to the high temperatures that are generated before the fat
covers the heating element, the heating element can be
damaged or there could be a fire! Melt the fat beforehand
in a saucepan or similar .
Do not use the appliance near hot surfaces .
►
Never leave the appliance unattended while it is being used .
►
Caution! Hot surface!
Never use water to extinguish a fire in the deep fat
fryer!
Old or dirty fats and oils can spontaneously ignite if over-
►
heated . Change the oils or fats regularly . In the case of
a fire, remove the plug from the mains power socket and
smother the burning fat or oil with a blanket .
CAUTION – APPLIANCE DAMAGE!
When filling the frying container with fat, never fill it to
►
above the MAX marking or to below the MIN marking .
Whenever you intend to switch the appliance on, first ensure
that there is sufficient oil or fat in the deep fat fryer .
Never switch the appliance on if there is no oil or liquid fat
►
in it . Otherwise the appliance may overheat .
This deep fat fryer is suitable only for frying foodstuffs . It is
►
not designed for cooking liquids .

Before initial use

■ Before you use the deep fat fryer for the first time, please clean all individual
components thoroughly and carefully dry them (see chapter "Cleaning and
care") .
■ 6 │ GB │ IE
SEF3 2000 C4