4 - 18 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
OBEX OPP server enables the Object Push Profile server. A warm reset must be performed on the Workabout
Pro4 after a change is made to this option. The OPP Server allows other Bluetooth devices to send files to
this device.
•
Tap on the checkbox to activate the server – the associated port name is displayed beside the
server name.
Mode Tab
When Turn on Bluetooth is checked, Bluetooth features are available. If this option is disabled, you cannot
send or receive information using Bluetooth.
When Discoverable is enabled, other Bluetooth devices within range (approximately 10 meters) can detect
your Workabout Pro4 and can establish a bond or use a Bluetooth service. Note that other devices can detect
your unit whether or not a bond has been created.
About Tab
Name displays the broadcasted name of the Workabout Pro4. The name can be changed in the About applet –
tap on Start>Settings>System>About icon. Tap on the Device ID tab, and change the name.
Local Address displays the MAC address (BD_Addr) of the Bluetooth chip.
HCI Version & LMP Version display the version of the chip firmware.
Component indicates the version of the Bluetooth Subsystem (the manager, drivers, etc).
Profiles lists the supported profiles on this specific Workabout Pro4.
Draft #6