Table of Contents
Advertisement
4 - 32 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
Connecting to the Internet
To connect to the Internet on a WLAN when using Fusion Wireless Companion, ensure that the network card
settings is set to Internet:
•
Ensure the Fusion is enabled and a profile is configured.
•
Tap on Start>Settings>Connections>Wi-Fi.
•
In the My network card Connects to drop-down menu, choose The Internet.
•
Tap on OK.
Fusion Setup
NOTE
WLAN configuration information must be obtained from the system administrator
before performing Fusion setup procedures.
•
In the Today screen, tap on the Fusion softkey at the bottom of the screen to display the Fusion Launcher
dialog box. Alternately, you can tap on Start>Wireless Companion>Wireless Launch.
NOTE
The Fusion setup example following uses Open encryption. Depending on what
you choose, the setup may vary slightly.
The Fusion Launcher items and their corresponding applications are summarized in the table following.
Application
Find WLANS
Manage Profiles
Manage Certs
Manage PACs
Options
Wireless Status
Draft #6
Displays a list of the WLANs active in the area.
Used to create new profiles and manage and edit existing profiles.
Used to manage authentication certificates.
Used to manage a list of Protected Access Credentials (PAC) used with
Extensible Authentication Protocol-Flexible Authentication via Secure
Tunneling (EAP-FAST) authentication.
Provides options which allow the user to configure the Fusion
option settings.
Displays the status of the current wireless connection (view only).
Description
Advertisement
Table of Contents
