Table of Contents
Advertisement
3 - 28 Workabout Pro4 (Windows Embedded Hand-Held 6.5) User Manual
For a GPRS, 1xRTT or dialup connection:
•
Tap on Start>Settings>Connections. Tap on the Connections icon.
•
Under My Work Network, tap Add a new modem connection.
•
Type a name for the connection, and choose Cellular Line (GPRS), or for 1xRTT connections, choose
Cellular Line. Tap on Next.
•
Type the phone number or access point name provided by your service provider, and tap Next.
•
Type the credentials supplied by your service provider, and tap Finish.
Using Internet Sharing
NOTE
Make certain that your data connection is running and that you can access the Inter-
net from the Workabout Pro4. If you are using a USB cable to connect to your PC, you
will need to disable the ActiveSync USB connection.
•
On your PC, open the ActiveSync window, and tap on File>Connection Settings. If you are using
Windows Mobile Device Center, tap on Mobile Device Settings>Connection Settings.
•
Disable Allow USB connection by tapping in the checkbox to the left of this option.
•
Connect the Workabout Pro4 to your PC using Bluetooth or a USB cable.
•
On your Workabout Pro4, tap Start>Internet Sharing.
•
Choose the PC Connection type – USB or Bluetooth.
•
Choose the network connection that the Workabout Pro4 should use to connect to the Internet.
•
Tap Connect. It takes approximately 30 seconds to establish a connection. (If you are prompted to turn on
Bluetooth, tap Yes.)
For PC Running Windows XP or Earlier
If you are using a Bluetooth connection, execute the following steps on your PC:
•
Tap Start>Control Panel>Network Connections.
•
Right-click on Bluetooth Network Connections, and click on Bluetooth Network Devices.
•
If the Workabout Pro4 is listed as a Network Access Point, choose Connect. If it is not listed, choose
Create a new connection and use the New Connection Wizard to add the Workabout Pro4 to the list.
For PC Running Windows Vista or Windows 7
If you are using a Bluetooth connection, execute the following steps on your PC:
•
Tap Start>Control Panel>Network & Sharing Center.
•
Double-tap on Set up a new connection or network.
•
In the Choose a connection option screen, double-click on Connect to a Bluetooth personal area
network (PAN).
A Devices and Printers screen is displayed.
NOTE
Make certain that Bluetooth is enabled on your Workabout Pro4 and that it is
discoverable – on your Workabout Pro4, tap on Start>Settings>Connections.
Tap on the Bluetooth icon. Scroll to the Mode tab. If they are not already
enabled, tap in the checkbox (add an 'x') next to Turn on Bluetooth and
Discoverable.
Draft #6
Advertisement
Table of Contents
