Table of Contents
Advertisement
Linking a Workabout Pro4 to a PC
The desktop docking station can be connected to a PC so that you can exchange files in the same way that
you would between PC drives. A USB cable is included with your docking station.
NOTE
For details about data transfer through Windows XP and ActiveSync and through
Vista, refer to
To link the Workabout Pro4 to a PC:
•
Insert the hand-held in the desktop docking station.
•
Insert the USB cable into the docking station Client USB connector. Attach the other end of the cable to a
USB port on the PC.
Troubleshooting the Docking Station Operations
The indicators, applications and drivers required to use and monitor the desktop docking station as a dock (as
opposed to a charger) are installed on the Workabout Pro4 – no applications are present on the docking station
itself.
AC Wall Adaptor – Model #PSA15R-050P
The AC wall adaptor available for your Workabout Pro4 allows you to operate your hand-held using AC power
while charging the battery inserted in the unit.
Adaptor plugs suitable for use in the following countries are shipped with the AC wall adaptor: United Kingdom,
Australia, Europe and North America.
•
Choose the adaptor plug that is suitable for use in your country. Slide the adaptor plug into the Universal
AC power supply, snapping it into place. These two pieces, coupled together, are referred to as an AC
wall adaptor.
•
Insert the DC power plug into the DC IN socket at the base of Workabout Pro4, located between the tether
and LIF ports.
•
Plug the pronged end into an AC outlet.
Draft #6
"Data Transfer Between the PC & the EP10" on page
Universal AC Power Supply
Peripheral Devices & Accessories 5 - 7
29.
Adaptor Plugs
DC Power Plug
Advertisement
Table of Contents
