Table of Contents
Advertisement
Chapter 2
Using the Chronograph Function
· The chronograph screen has three types of screens that you can switch between.
You can change the content displayed on each screen from [Settings] - [Scrn.Settings]
(
P.
33).
· After resetting, hold down
[Menu] screen. By updating the GPS data, the GPS measurement data is recorded. The
recorded data is used to increase the measurement accuracy for distance and pace.
· If 60 minutes pass without any measurements being made (if the device is stopped or
before measuring), the [Menu] screen is displayed.
· You can use [Recall] to check the stored measurement data (
for a few seconds to update GPS data and return to the
32
P.
55).
Advertisement
Table of Contents
