Epson SS-500R User Manual page 61

Chapter 6
Measuring Distance and Pace with the Stride Sensor (SS-700/SS-500 Only)
Use /
4
After confirming the selection, the [Settings] screen is displayed.
When [Stride] is set to [ON],
interval measurement screen.
Hold down
5
[Menu] screen.
To turn this function off, select [OFF] in step
If a GPS signal is not received while using the chronograph, exercise, or interval
functions, you can perform distance and pace measurement with the stride sensor.
You can check that the stride sensor is enabled by the measurement icon on the
screen.
Measurement screen: Chronograph
to highlight [ON], and then press
is displayed on the chronograph, exercise, and
for at least two seconds to return to the
On: The stride sensor is enabled.
.
4
61
.