Chapter 3 Web GUI Functions
3.5 Maintenance
You can perform the following operations on the [Maintenance] screen.
Operation Item
Enter Maintenance
Exit Maintenance
Power Control
Entering the Maintenance State
1.
To place the FX700 main unit or a FRU in the maintenance state, click its radio button.
Note
Figure 3.17 [Maintenance] Screen
Table 3.33 Operation Items on the [Maintenance] Screen
Enter the maintenance state. For the procedure, see
State."
Release the maintenance state. For the procedure, see
Maintenance
State."
Execute the power operation instruction of the CMU or PSU in the maintenance
state. For the procedure, see
Description
"Executing a Power
43
"Entering the Maintenance
"Releasing the
Operation."
C120-0091-02EN