Table of Contents
Advertisement
Appendix A REMCS
A.2 REMCS Detail Setup
Table A.6 Information Specified on the [Environment settings] Screen (continued)
Input Item
Authentication type
AUTH SMTP type(*1)
UserID
Password
POP settings (if [Authentication type] is [POP Before SMTP])
POP Server
POP Port No.
Wait Time after POP Authentication Yes
Others
Sender E-mail Address
Large data transmission
method(*4)
Input Required?
-
Select an authentication type from the following:
- No Certification
- POP Before SMTP
- AUTH SMTP
-
Select the AUTH SMTP authentication mechanism from the
following:
- AUTO (Default)
- CRAM-MD5
- PLAIN
- LOGIN
Conditional(*2) Specify the user ID for the authentication server with up to 64
single-byte alphanumeric characters.
Conditional(*2) Specify the password for the authentication server with up to
64 single-byte alphanumeric characters. "*" (asterisk) is
displayed for every specified character.
Conditional(*3) Specify the POP server name or IP address with up to 128
single-byte alphanumeric characters.
Yes
Specify the port number of the POP3 authentication server
with up to 5 single-byte digits. You can specify a value
between 1 and 65535. The default is to use 110 (Well Known
Port).
Using up to 5 single-byte digits, specify the wait time (in
milliseconds) until e-mail transfer begins after POP3
authentication. You can specify a value between 0 and 30000.
The recommended value is 10000 milliseconds.
Yes
Specify the sender's e-mail address with up to 128 single-byte
alphanumeric characters.
-
Select a large data transmission method from the following:
- No split
- Split large data into multiple E-mails
- Split event (Default)
74
Description
C120-0091-02EN
Advertisement
Table of Contents
