Silvercrest SSMS 600 D3 Operating Instructions Manual page 32

NOTICE
► NEVER fill the bowl 8 BEYOND the MAX marking . Otherwise, the
appliance does not function optimally .
■ Place the bowl lid 6 onto the bowl 8 and turn it until tight . Thereby, the
lugs on the edge of the bowl 8 must be guided into the rail on the bowl
lid 6 . Please ensure that the blade 7 is correctly engaged in the bowl lid 6 .
■ Place the motor unit 4 on the bowl lid 6 so that the arrow points to the sym-
bol
NOTICE
► Should you wish to keep foodstuffs in the bowl 8 you can remove the
base of the bowl 8 and use it as a lid . For this, carefully remove the bowl
lid 6 and motor unit 4 and, if needs be, the blade 7 . Loosen the base
of the bowl 8 and then place it onto the bowl 8 .
Holding the appliance
To operate the appliance, hold it as follows:
SSMS 600 D3
. Turn the motor unit 4 until the arrow points to the symbol .
GB │ MT │ 29 ■