Frigidaire Professional Series Owner's Manual page 14

Setting Oven Controls
(continued)
Use caution when using
the automatic timer. Use the automatic
timer when cooking cured or frozen
meats and most fruits and vegetables.
Foods that can easily spoil such as milk,
eggs, fish, meat or poultry, should be
chilled in the refrigerator first.
when chilled, they should not stand in the
oven for more than 1 hour before
cooking begins, and should be removed
promptly when cooking is completed.
Due to better heat distribution inside the
oven, lower temperatures can be used
when using the convection mode. When
using the convection mode, the actual
oven temperature can be reduced by
25°F/12°C lower than shown in the
recipe. This allows you to use your existing
recipes.
To Set the Automatic Timer (Timed Bake Feature):
The BAKE TIME and STOP TIME buttons control the Time Bake operation. The
automatic timer will turn the oven on and off at the times you select in advance.
The oven can be programmed to start immediately and to shut off
automatically:
1. Be sure that the clock shows the correct time of day.
Even
2. Place the food in the oven.
3. Push the BAKE TIME button. "— —:— —" and the words "BAKE TIME" will
glow in the display window.
4. Push and hold the UP ARROW button until the desired baking time appears
in the display. The baking time can be set for any amount of time from 5
minutes to 11 hours and 59 minutes. When setting the baking time, the time
will appear in the display and increase in 5 minute increments.
5. Push the BAKE or CONV. BAKE/ROAST button. "— — —°" and the word
"BAKE" will glow in the display.
6. Push and hold the UP or DOWN ARROW button until the desired baking
temperature appears in the display.
Once the controls are set:
a. The oven will come on and begin heating to the selected baking temperature.
b. The words "BAKE" and "ON" will appear in the display.
c. The main display will show the oven baking time and will count down by
minutes until it reaches ":00".
When the set BAKE TIME runs out:
a. ":00" will appear in the display window and the oven will shut off automatically.
b. The control will beep 3 times.
c. The control will then continue to beep once every 10 seconds for 5 minutes or
until the CANCEL button is pushed.
To program oven for a delayed start time and to shut off automatically:
Follow steps 1-4 above, THEN:
5. After the bake time has been set, "— — —°" will appear in the display and
the word "BAKE" will flash.
6. Push the STOP TIME button. The time when baking will stop will appear in
the display window. The words "BAKE STOP TIME" will glow in the display.
7. Push and hold the UP ARROW button until the time that you want cooking
to be completed appears in the display.
8. Push the BAKE or CONV. BAKE/ROAST button. "— — —°" will appear, and
the word "BAKE"will glow in the display.
9. Push and hold the UP or DOWN ARROW button until the desired baking
temperature appears in the display.
10. If the baking temperature is not set, the control will beep. "— — —°" and the
word "BAKE" will flash in the display.
14