Control Pad Functions - Frigidaire Professional Series Owner's Manual

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various functions of the oven as described below.
CONV.
BAKE/ROAST
BUTTON— Used
to select the
convection bake/
roast mode.
CLEAN
BUTTON—
Used to
select the
self-cleaning
cycle.
VARI BROIL
BUTTON— Used to
select the variable
broil function.
The oven can be programmed to:
• Bake normally
• Convection bake/roast
• Time bake or convection bake/roast with automatic on and off times
• Vari Broil
• Self-clean
IMPORTANT: The control cannot be used until the clock is set to the time of day.
For a silent control panel:
When choosing a function, a beep will be heard each time a button is pushed. If desired, the controls can be programmed for
silent operation. Push and hold the STOP TIME button. After 7 seconds, the control will beep once. This will block the controls
from sounding when a button is pushed. To return the sound, push and hold the STOP TIME button again for 7 seconds until
1 beep is heard.

Control Pad Functions

BAKE BUTTON—
Used to enter the
normal baking mode
temperature.
BAKE TIME
BUTTON—
Used to enter
the length of
STOP TIME BUTTON— Used
the baking
with the BAKE TIME, BAKE,
time.
CONV. BAKE/ROAST and
CLEAN buttons to program a
delayed automatic baking or
cleaning cycle stop time.
UP and DOWN ARROW
BUTTONS— Used along
with the function
buttons to select oven
temperature, cooking
time, stop time (when
programming an
automatic stop time),
time of day, clean time
and minute timer.
CLOCK BUTTON—
Used to set the time
of day.
5
TIMER ON/OFF
BUTTON— Used to
set or cancel the
minute timer. The
minute timer does not
start or stop cooking.
CANCEL BUTTON—
Used to cancel any
function previously
entered except the
time of day and minute
timer. Push the
CANCEL button to
stop cooking.