ABB Relion REC615 Manual
  1. Manuals
  2. Brands
  3. ABB Manuals
  4. Industrial Equipment
  5. Relion REC615
  6. Manual

ABB Relion REC615 Manual

Grid automation remote monitoring and control
Hide thumbs Also See for Relion REC615:
Table of Contents

Advertisement

Quick Links

Download this manual
®
Relion
product family
Grid Automation
Remote Monitoring and Control REC615
DNP3 Point List Manual

Advertisement

Table of Contents
loading

Related Manuals for ABB Relion REC615

Summary of Contents for ABB Relion REC615

  • Page 1 ® Relion product family Grid Automation Remote Monitoring and Control REC615 DNP3 Point List Manual...
  • Page 3 Document ID: 1MRS757807 Issued: 2015-03-06 Revision: B Product version: 1.1 © Copyright 2015 ABB. All rights reserved...
  • Page 4 Copyright This document and parts thereof must not be reproduced or copied without written permission from ABB, and the contents thereof must not be imparted to a third party, nor used for any unauthorized purpose. The software or hardware described in this document is furnished under a license and may be used, copied, or disclosed only in accordance with the terms of such license.
  • Page 5 ABB is not liable for any such damages and/or losses.
  • Page 6 (EMC Directive 2004/108/EC) and concerning electrical equipment for use within specified voltage limits (Low-voltage directive 2006/95/EC). This conformity is the result of tests conducted by ABB in accordance with the product standards EN 50263 and EN 60255-26 for the EMC directive, and with the product standards EN 60255-1 and EN 60255-27 for the low voltage directive.

  • Page 7: Table Of Contents

    Table of contents Table of contents Section 1 Introduction...............7 This manual..................7 Intended audience................7 Product documentation...............8 Product documentation set............8 Document revision history.............8 Related documentation..............9 Symbols and conventions..............9 Symbols..................9 Document conventions..............9 Functions, codes and symbols............10 Section 2 DNP3 data mappings.............15 Overview...................15 Supported functions in REC615............15 Binary inputs..................18 System functions.................18 CTRL.LLN0 Local/remote state (also present in DNP IIN-...
  • Page 8 Table of contents Metering and measurand functions..........24 LD0.CMMXU1 Phase current limit supervision (1)....24 LD0.RESCMMXU1 Residual current limit supervision (1)...................24 LD0.VMMXU1 Three-phase voltage limit supervision (1)...................25 LD0.VMMXU2 Three-phase voltage limit supervision (2)...................25 Power quality functions..............25 LD0.CMHAI1 Current total demand distortion (1)....25 LD0.VMHAI1 Voltage total harmonic distortion (1)....25 LD0.PHQVVR1 Voltage variation signals (1)......26 LD0.VSQVUB1 Voltage unbalance detection (1)....26...
  • Page 9 Table of contents LD0.WPWDE1 Wattmetric-based earth-fault protection (1)...................30 LD0.WPWDE2 Wattmetric-based earth-fault protection (2)...................30 LD0.WPWDE3 Wattmetric-based earth-fault protection (3)...................30 LD0.HAEFPTOC1 Harmonics-based earth-fault protection (1)................30 LD0.NSPTOC1 Negative-sequence overcurrent protection (1)................31 LD0.NSPTOC2 Negative-sequence overcurrent protection (2)................31 LD0.PDNSPTOC1 Phase discontinuity protection (1)....31 LD0.ROVPTOV1 Residual overvoltage protection (1)...31 LD0.ROVPTOV2 Residual overvoltage protection (2)...31 LD0.PHPTUV1 Phase undervoltage protection (1)....32 LD0.PHPTUV2 Phase undervoltage protection (2)....32...
  • Page 10 Table of contents LD0.MAPGAPC4 Multipurpose analog protection function (4)................37 LD0.MAPGAPC5 Multipurpose analog protection function (5)................37 LD0.MAPGAPC6 Multipurpose analog protection function (6)................38 LD0.MVGAPC1 Multipurpose binary inputs (1)......38 LD0.MVGAPC2 Multipurpose binary inputs (2)......38 LD0.MVGAPC3 Multipurpose binary inputs (3)......39 LD0.MVGAPC4 Multipurpose binary inputs (4)......39 LD0.MVGAPC5 Multipurpose binary inputs (5)......39 LD0.MVGAPC6 Multipurpose binary inputs (6)......40 LD0.MVGAPC7 Multipurpose binary inputs (7)......40...
  • Page 11 Table of contents Protection-related functions............47 LD0.DARREC1 Autoreclosing reset signals (1).....47 Generic functions.................47 LD0.SRGAPC1 Multipurpose binary output flip-flop resets (1)................47 LD0.SRGAPC2 Multipurpose binary output flip-flop resets (2)................47 LD0.SPCGGIO1 Multipurpose binary outputs (1) ....48 LD0.SPCGGIO2 Multipurpose binary outputs (2) ....48 LD0.SPCRGGIO1 Multipurpose binary outputs (1)....49 Analog inputs..................50 System functions.................50 CTRL.LLN0 Local remote station off........50...
  • Page 12 Table of contents LD0.HAEFMHAI1 Current harmonics (1).......57 LD0.PEMMTR1 Power measurement and accumulated power values (1)..............58 Protection functions..............58 LD0.T1PTTR1 Thermal protection values (1)......58 Protection-related functions............58 LD0.DARREC1 Autoreclosing values (1).......58 LD0.SECRSYN1 Synchrocheck line and bus state (1)..58 Generic functions.................59 LD0.SCA4GAPC1 Multipurpose analog signals (1)....59 LD0.SCA4GAPC2 Multipurpose analog signals (2)....59 LD0.SCA4GAPC3 Multipurpose analog signals (3)....59 LD0.SCA4GAPC4 Multipurpose analog signals (4)....59...

  • Page 13: Section 1 Introduction

    Section 1 1MRS757807 B Introduction Section 1 Introduction This manual The point list manual describes the outlook and properties of the data points specific to the IED. The manual should be used in conjunction with the corresponding communication protocol manual. Intended audience This manual addresses the communication system engineer or system integrator responsible for pre-engineering and engineering for communication setup in a...

  • Page 14: Product Documentation

    ABB Website http://www.abb.com/relion. 1.3.2 Document revision history Document revision/date Product version History A/2013-09-17 First release B/2015-03-06 Content updated to correspond to the product version Download the latest documents from the ABB Website http://www.abb.com/substationautomation. Remote Monitoring and Control REC615 Point List Manual...

  • Page 15: Related Documentation

    Section 1 1MRS757807 B Introduction 1.3.3 Related documentation Name of the document Document ID DNP3 Communication Protocol Manual 1MRS757804 Symbols and conventions 1.4.1 Symbols The caution icon indicates important information or warning related to the concept discussed in the text. It might indicate the presence of a hazard which could result in corruption of software or damage to equipment or property.

  • Page 16: Functions, Codes And Symbols

    Section 1 1MRS757807 B Introduction 1.4.3 Functions, codes and symbols All available functions are listed in the table. All of them may not be applicable to all products. Table 1: Functions included in the relay Function IEC 61850 IEC 60617 IEC-ANSI Protection Three-phase non-directional...
  • Page 17 Section 1 1MRS757807 B Introduction Function IEC 61850 IEC 60617 IEC-ANSI Harmonics based earth-fault HAEFPTOC1 Io>HA (1) 51NHA (1) protection, instance 1 Negative-sequence overcurrent NSPTOC1 I2> (1) 46 (1) protection, instance 1 Negative-sequence overcurrent NSPTOC2 I2> (2) 46 (2) protection, instance 2 Phase discontinuity protection, PDNSPTOC1 I2/I1>...
  • Page 18 Section 1 1MRS757807 B Introduction Function IEC 61850 IEC 60617 IEC-ANSI Power quality Current total demand distortion, CMHAI1 PQM3I (1) PQM3I (1) instance 1 Voltage total harmonic distortion, VMHAI1 PQM3U (1) PQM3V (1) instance 1 Voltage variation, instance 1 PHQVVR1 PQMU (1) PQMV (1) Voltage unbalance, instance 1...
  • Page 19 Section 1 1MRS757807 B Introduction Function IEC 61850 IEC 60617 IEC-ANSI Disturbance recorder, instance 1 RDRE1 DR (1) DFR (1) Three-phase current measurement, CMMXU1 3I (1) 3I (1) instance 1 Sequence current measurement, CSMSQI1 I1, I2, I0 (1) I1, I2, I0 (1) instance 1 Residual current measurement, RESCMMXU1...
  • Page 20 Section 1 1MRS757807 B Introduction Function IEC 61850 IEC 60617 IEC-ANSI Generic control point (16 pcs), SPCGGIO1 SPCGGIO (1) SPCGGIO (1) instance 1 Generic control point (16 pcs), SPCGGIO2 SPCGGIO (2) SPCGGIO (2) instance 2 Remote generic control points, SPCRGGIO1 SPCRGGIO (1) SPCRGGIO (1) instance 1...

  • Page 21: Section 2 Dnp3 Data Mappings

    Section 2 1MRS757807 B DNP3 data mappings Section 2 DNP3 data mappings Overview This document describes the DNP3 data points and structures available in the IED. The data points are unmapped as a default on the DNP3 level. The point lists describe a superset of all DNP3 data available through the standard configuration/s including the optional functionalities.
  • Page 22 Section 2 1MRS757807 B DNP3 data mappings Function IEC 61850 CE01 CE02 CE03 Admittance based earth-fault protection EFPADM 5)7)8) 5)7)8) 5)7)8) Wattmetric based earth-fault protection WPWDE 5)7)8) 5)7)8) 5)7)8) Harmonics based earth-fault protection HAEFPTOC 5)7) 5)7) 5)7) Negative-sequence overcurrent protection NSPTOC Phase discontinuity protection PDNSPTOC...
  • Page 23 Section 2 1MRS757807 B DNP3 data mappings Function IEC 61850 CE01 CE02 CE03 Sequence current measurement CSMSQI Residual current measurement RESCMMXU Three-phase voltage measurement VMMXU 1 (2) Sequence voltage measurement VSMSQI 1 (2) Three-phase power and energy measurement PEMMXU Frequency measurement FMMXU Load profile LDPMSTA...

  • Page 24: Binary Inputs

    Section 2 1MRS757807 B DNP3 data mappings Binary inputs Table 3: Explanations of the binary input table columns Column name Description IEC 61850 Original IED data object identification. Described in the IEC 61850 format as name Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the same as the application function block name.

  • Page 25: Switchgear Functions

    Section 2 1MRS757807 B DNP3 data mappings 2.3.2 Switchgear functions 2.3.2.1 CTRL.Cxxxxx1 Circuit breaker - CB object and failure protection (1) Table 7: CTRL.Cxxxxx1 Circuit breaker - CB object and failure protection (1) IEC 61850 name SA name Description Values CTRL.CBCILO1 .EnaCls.stVal ENA_CLOSE...

  • Page 26: Ctrl.dcxswi3 Disconnector Control (3)

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Values CTRL.DCXSWI2 .BlkCls.stVal BLK_CLOSE Close blocked 1=Blocked .BlkOpn.stVal BLK_OPEN Open blocked 1=Blocked 2.3.2.4 CTRL.DCXSWI3 Disconnector control (3) Table 10: CTRL.DCXSWI3 Disconnector control (3) IEC 61850 name SA name Description Values CTRL.DCCILO3...

  • Page 27: Ctrl.dcxswi6 Disconnector Control (6)

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Values .ItlByPss.stVal ITL_BYPASS Interlocking bypass 1=Bypassed CTRL.DCCSWI5 .Pos.stSeld SELECTED CB selected 1=Selected CTRL.DCXSWI5 .BlkCls.stVal BLK_CLOSE Close blocked 1=Blocked .BlkOpn.stVal BLK_OPEN Open blocked 1=Blocked 2.3.2.7 CTRL.DCXSWI6 Disconnector control (6) Table 13: CTRL.DCXSWI6 Disconnector control (6) IEC 61850 name...

  • Page 28: Ctrl.dcxswi8 Disconnector Control (8)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.2.9 CTRL.DCXSWI8 Disconnector control (8) Table 15: CTRL.DCXSWI8 Disconnector control (8) IEC 61850 name SA name Description Values CTRL.DCCILO8 .EnaCls.stVal ENA_CLOSE Close enabled 1=Enabled .EnaOpn.stVal ENA_OPEN Open enabled 1=Enabled .ItlByPss.stVal ITL_BYPASS Interlocking bypass 1=Bypassed CTRL.DCCSWI8 .Pos.stSeld...

  • Page 29: Ld0.Tcsscbr1 Trip Circuit Supervision (1)

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Values .LonTmAlm.stVal MON_ALM CB inactive alarm 1=Alarm .OpnAlm.stVal TRV_T_OP_ALM Cls travel time alarm 1=Alarm .OpNumAlm.stVal OPR_ALM CB operations alarm 1=Alarm .OpNumLO.stVal OPR_LO CB operations lockout 1=Lockout .PresAlm.stVal PRES_ALM Low pressure alarm 1=Alarm...

  • Page 30: Ld0.Phsvpr2 Voltage Presence Supervision (2)

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Values .VDea.stVal U_DEAD Low voltage presence 1=Low voltage .VDeaPhsA.stVal U_A_AB_DEAD Low phsA or phsAB voltage 1=Low voltage .VDeaPhsB.stVal U_B_BC_DEAD Low phsB or phsBC voltage 1=Low voltage .VDeaPhsC.stVal U_C_CA_DEAD Low phsC or phsCA voltage 1=Low voltage...

  • Page 31: Ld0.Vmmxu1 Three-Phase Voltage Limit Supervision (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.4.3 LD0.VMMXU1 Three-phase voltage limit supervision (1) Table 25: LD0.VMMXU1 Three-phase voltage limit supervision (1) IEC 61850 name SA name Description Values LD0.VMMXU1 .HiAlm.stVal HIGH_ALARM High alarm 1=Alarm .HiWrn.stVal HIGH_WARN High warning 1=Warning .LoAlm.stVal LOW_ALARM Low alarm...

  • Page 32: Ld0.Phqvvr1 Voltage Variation Signals (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.5.3 LD0.PHQVVR1 Voltage variation signals (1) Table 29: LD0.PHQVVR1 Voltage variation signals (1) IEC 61850 name SA name Description Values LD0.PH1QVVR1 .VarStrGen.stVal Variation event detected 1=Detected .VarEnd.stVal Variation event ended 1=Ended .SwlOp.stVal Swell event detected 1=Detected .DipOp.stVal Dip event detected...

  • Page 33: Ld0.Phiptoc1 Phase Overcurrent Protection, Instantaneous Stage (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.3 LD0.PHIPTOC1 Phase overcurrent protection, instantaneous stage (1) Table 33: LD0.PHIPTOC1 Phase overcurrent protection, instantaneous stage (1) IEC 61850 name SA name Description Values LD0.PHIPTOC1 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.4 LD0.DPHLPDOC1 Three-phase directional overcurrent protection,...

  • Page 34: Ld0.Eflptoc1 Non-Directional Earth-Fault And Sensitive Earth-Fault Protection, Low Stage (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.7 LD0.EFLPTOC1 Non-directional earth-fault and sensitive earth-fault protection, low stage (1) Table 37: LD0.EFLPTOC1 Non-directional earth-fault and sensitive earth-fault protection, low stage (1) IEC 61850 name SA name Description Values LD0.EFLPTOC1 Low stage (1) .Op.general OPERATE -Operate...

  • Page 35: Ld0.Deflpdef2 Directional Earth-Fault Protection, Low Stage (2)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.11 LD0.DEFLPDEF2 Directional earth-fault protection, low stage (2) Table 41: LD0.DEFLPDEF2 Directional earth-fault protection, low stage (2) IEC 61850 name SA name Description Values LD0.DEFLPTOC2 Low stage (2) .Op.general OPERATE -Operate 1=Operate .Str.general START -Start 1=Start...

  • Page 36: Ld0.Efpadm3 Admittance-Based Earth-Fault Protection (3)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.16 LD0.EFPADM3 Admittance-based earth-fault protection (3) Table 46: LD0.EFPADM3 Admittance-based earth-fault protection (3) IEC 61850 name SA name Description Values LD0.EFPADM3 .Str.general START Stage3 start 1=Start .Op.general OPERATE Stage3 operate 1=Operate 2.3.6.17 LD0.WPWDE1 Wattmetric-based earth-fault protection (1) Table 47: LD0.WPWDE1 Wattmetric-based earth-fault protection (1) IEC 61850 name...

  • Page 37: Ld0.Nsptoc1 Negative-Sequence Overcurrent Protection (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.21 LD0.NSPTOC1 Negative-sequence overcurrent protection (1) Table 51: LD0.NSPTOC1 Negative-sequence overcurrent protection (1) IEC 61850 name SA name Description Values LD0.NSPTOC1 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.22 LD0.NSPTOC2 Negative-sequence overcurrent protection (2) Table 52: LD0.NSPTOC2 Negative-sequence overcurrent protection (2) IEC 61850 name...

  • Page 38: Ld0.Phptuv1 Phase Undervoltage Protection (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.26 LD0.PHPTUV1 Phase undervoltage protection (1) Table 56: LD0.PHPTUV1 Phase undervoltage protection (1) IEC 61850 name SA name Description Values LD0.PHPTUV1 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.27 LD0.PHPTUV2 Phase undervoltage protection (2) Table 57: LD0.PHPTUV2 Phase undervoltage protection (2) IEC 61850 name...

  • Page 39: Ld0.Phptov3 Phase Overvoltage Protection (3)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.31 LD0.PHPTOV3 Phase overvoltage protection (3) Table 61: LD0.PHPTOV3 Phase overvoltage protection (3) IEC 61850 name SA name Description Values LD0.PHPTOV3 .Op.general OPERATE Stage operate 1=Operate .Str.general START Stage start 1=Start 2.3.6.32 LD0.PSPTUV1 Positive-sequence undervoltage protection (1) Table 62: LD0.PSPTUV1 Positive-sequence undervoltage protection (1) IEC 61850 name...

  • Page 40: Ld0.Frpfrq2 Frequency Protection (2)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.35 LD0.FRPFRQ2 Frequency protection (2) Table 65: LD0.FRPFRQ2 Frequency protection (2) IEC 61850 name SA name Description Values LD0.FRPTRC2 .Str.general START Stage start 1=Start LD0.FRPTOF2 Overfrequency .Op.general OPR_OFRQ -Operate 1=Operate LD0.FRPTUF2 Underfrequency .Op.general OPR_UFRQ -Operate 1=Operate...

  • Page 41: Ld0.Trpptrc2 Global Conditioning (2)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.6.39 LD0.TRPPTRC2 Global conditioning (2) Table 69: LD0.TRPPTRC2 Global conditioning (2) IEC 61850 name SA name Description Values .Op.general Operate input signal 1=Operate .Tr.general Trip output signal 1=Trip 2.3.6.40 LD0.LSHDPFRQ1 Load-shedding (1) Table 70: LD0.LSHDPFRQ1 Load-shedding (1) IEC 61850 name SA name...

  • Page 42: Ld0.Secrsyn1 Synchrocheck (1)

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Values .PrgRec3.stVal INPRO_3 AR 3rd reclose 1=In progress .PrgRec4.stVal INPRO_4 AR 4th reclose 1=In progress .PrgRec5.stVal INPRO_5 AR 5th reclose 1=In progress .PrgRec.stVal INPRO AR in progress 1=In progress .CBManCls.stVal MAN_CB_CL...

  • Page 43: Generic Functions

    Section 2 1MRS757807 B DNP3 data mappings 2.3.8 Generic functions 2.3.8.1 LD0.MAPGAPC1 Multipurpose analog protection function (1) Table 75: LD0.MAPGAPC1 Multipurpose analog protection function (1) IEC 61850 name SA name Description Values LD0.MAPGAPC1 .Op.general OPERATE Stage operate 1 = Operate .Str.general START Stage start...

  • Page 44: Ld0.Mapgapc6 Multipurpose Analog Protection Function (6)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.8.6 LD0.MAPGAPC6 Multipurpose analog protection function (6) Table 80: LD0.MAPGAPC6 Multipurpose analog protection function (6) IEC 61850 name SA name Description Values LD0.MAPGAPC6 .Op.general OPERATE Stage operate 1 = Operate .Str.general START Stage start 1 = Start 2.3.8.7 LD0.MVGAPC1 Multipurpose binary inputs (1)

  • Page 45: Ld0.Mvgapc3 Multipurpose Binary Inputs (3)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.8.9 LD0.MVGAPC3 Multipurpose binary inputs (3) Table 83: LD0.MVGAPC3 Multipurpose binary inputs (3) IEC 61850 name SA name Description Values LD0.MVGAPC3 .Q1.stVal Input 1 signal 0/1=Off/On .Q2.stVal Input 2 signal 0/1=Off/On .Q3.stVal Input 3 signal 0/1=Off/On .Q4.stVal Input 4 signal...

  • Page 46: Ld0.Mvgapc6 Multipurpose Binary Inputs (6)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.8.12 LD0.MVGAPC6 Multipurpose binary inputs (6) Table 86: LD0.MVGAPC6 Multipurpose binary inputs (6) IEC 61850 name SA name Description Values LD0.MVGAPC6 .Q1.stVal Input 1 signal 0/1=Off/On .Q2.stVal Input 2 signal 0/1=Off/On .Q3.stVal Input 3 signal 0/1=Off/On .Q4.stVal Input 4 signal...

  • Page 47: Ld0.Spcggio2 Multipurpose Binary Output Status (2)

    Section 2 1MRS757807 B DNP3 data mappings 2.3.8.15 LD0.SPCGGIO2 Multipurpose binary output status (2) Table 89: LD0.SPCGGIO2 Multipurpose binary output status (2) IEC 61850 name SA name Description Values LD0.SPCGGIO2 .SPCS01.stVal Output 1 state 0/1=Off/On .SPCS02.stVal Output 2 state 0/1=Off/On .SPCS03.stVal Output 3 state 0/1=Off/On...

  • Page 48: Physical And Raw I/O Data

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Values .SPCS14.stVal Output 14 state 0/1=Off/On .SPCS15.stVal Output 15 state 0/1=Off/On .SPCS16.stVal Output 16 state 0/1=Off/On 2.3.9 Physical and raw I/O data 2.3.9.1 LD0.XGGIO100 Physical I/O Table 91: LD0.XGGIO100 Physical I/O IEC 61850 name SA name...

  • Page 49: Ld0.Xggio120 Physical I/O

    Section 2 1MRS757807 B DNP3 data mappings 2.3.9.3 LD0.XGGIO120 Physical I/O Table 93: LD0.XGGIO120 Physical I/O IEC 61850 name SA name Description Values LD0.XGGIO120 .Ind1.stVal X120-Input 1 1/0=ON/OFF .Ind2.stVal X120-Input 2 1/0=ON/OFF .Ind3.stVal X120-Input 3 1/0=ON/OFF .Ind4.stVal X120-Input 4 1/0=ON/OFF 2.3.10 Automation functions 2.3.10.1...

  • Page 50: System Functions

    Section 2 1MRS757807 B DNP3 data mappings 2.4.1 System functions 2.4.1.1 LD0.DNPGGIO1 Parameter setting group control (1) Table 96: LD0.DNPGGIO1 Parameter setting group control (1) IEC 61850 name SA name Description Type LD0.DNPGGIO1 .ActSG1.ctlVal Setting group 1 .ActSG2.ctlVal Setting group 2 .ActSG3.ctlVal Setting group 3 .ActSG4.ctlVal...

  • Page 51: Ctrl.dcxswi2 Disconnector Control (2)

    Section 2 1MRS757807 B DNP3 data mappings 2.4.2.3 CTRL.DCXSWI2 Disconnector control (2) Table 100: CTRL.DCXSWI2 Disconnector control (2) IEC 61850 name SA name Description Type CTRL.DCCSWI2 .Pos.Oper.ctlVal Disconnector control On/Off 2.4.2.4 CTRL.DCXSWI3 Disconnector control (3) Table 101: CTRL.DCXSWI3 Disconnector control (3) IEC 61850 name SA name Description...

  • Page 52: Ctrl.dcxswi8 Disconnector Control (8)

    Section 2 1MRS757807 B DNP3 data mappings 2.4.2.9 CTRL.DCXSWI8 Disconnector control (8) Table 106: CTRL.DCXSWI8 Disconnector control (8) IEC 61850 name SA name Description Type CTRL.DCCSWI8 .Pos.Oper.ctlVal Disconnector control On/Off 2.4.3 Sensors and monitoring functions 2.4.3.1 LD0.SSCBR1 Reset signals of CB condition monitoring (1) Table 107: LD0.SSCBR1 Reset signals of CB condition monitoring (1) IEC 61850 name...

  • Page 53: Protection-Related Functions

    Section 2 1MRS757807 B DNP3 data mappings 2.4.5 Protection-related functions 2.4.5.1 LD0.DARREC1 Autoreclosing reset signals (1) Table 110: LD0.DARREC1 Autoreclosing reset signals (1) IEC 61850 name SA name Description Type LD0.DARREC1 .RsCnt.Oper.ctlVal AR reset all counters .RsRec.Oper.ctlVal AR reset 2.4.6 Generic functions 2.4.6.1 LD0.SRGAPC1 Multipurpose binary output flip-flop resets (1)

  • Page 54: Ld0.Spcggio1 Multipurpose Binary Outputs (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.4.6.3 LD0.SPCGGIO1 Multipurpose binary outputs (1) The binary outputs can be configured either as pulse- or persistent-type outputs. Pulse- type outputs are triggered with the write value "1". Persistent-type outputs can be written with both values "1" and "0" values. The setting mode "toggled" for local operation corresponds to "persistent"...

  • Page 55: Ld0.Spcrggio1 Multipurpose Binary Outputs (1)

    Section 2 1MRS757807 B DNP3 data mappings IEC 61850 name SA name Description Type .SPCSO6.Oper.ctlVal Output 6 control On/Off .SPCSO7.Oper.ctlVal Output 7 control On/Off .SPCSO8.Oper.ctlVal Output 8 control On/Off .SPCSO9.Oper.ctlVal Output 9 control On/Off .SPCSO10.Oper.ctlVal Output 10 control On/Off .SPCSO11.Oper.ctlVal Output 11 control On/Off .SPCSO12.Oper.ctlVal...

  • Page 56: Analog Inputs

    Section 2 1MRS757807 B DNP3 data mappings Analog inputs Table 116: Explanations of the analog input table columns Column name Description IEC 61850 Original IED data object identification. Described in the IEC 61850 format as name Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical Node is the same as the application function block name.

  • Page 57: Ld0.Ledggio1 Lhmi Led Indications (3 States) (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.1.3 LD0.LEDGGIO1 LHMI LED indications (3 states) (1) Table 119: LD0.LEDGGIO1 LHMI LED indications (3 states) (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.LEDGGIO1 0/1/3=Off/Ok/ .ISCSO1.stVal LED 1 state Alarm 0,3,0,3 0/1/3=Off/Ok/ .ISCSO2.stVal...

  • Page 58: Switchgear Functions

    Section 2 1MRS757807 B DNP3 data mappings 2.5.2 Switchgear functions 2.5.2.1 CTRL.CBCSWI1 Circuit breaker, 4-pole (2 bit) position value (1) Table 121: CTRL.CBCSWI1 Circuit breaker, 4-pole (2 bit) position value (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.CBCSWI1 Intermediate=0;...

  • Page 59: Ctrl.dcxswi5 Disconnector Control (5)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.2.6 CTRL.DCXSWI5 Disconnector control (5) Table 126: CTRL.DCXSWI5 Disconnector control (5) IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.DCXSWI5 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3 0…3 0,3,0,3 2.5.2.7 CTRL.DCXSWI6 Disconnector control (6) Table 127: CTRL.DCXSWI6 Disconnector control (6) IEC 61850 name...

  • Page 60: Ctrl.essxswi2 Earthing Switch Indication (2)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.2.11 CTRL.ESSXSWI2 Earthing switch indication (2) Table 131: CTRL.ESSXSWI2 Earthing switch indication (2) IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.ESSXSWI2 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3 0…3 0,3,0,3 2.5.2.12 CTRL.ESSXSWI3 Earthing switch indication (3) Table 132: CTRL.ESSXSWI3 Earthing switch indication (3) IEC 61850 name...

  • Page 61: Ctrl.essxswi7 Earthing Switch Indication (7)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.2.16 CTRL.ESSXSWI7 Earthing switch indication (7) Table 136: CTRL.ESSXSWI7 Earthing switch indication (7) IEC 61850 name SA name Description Values Arg 1,2,3,4 CTRL.ESSXSWI7 Intermediate=0; Off=1; On=2; .Pos.stVal POSITION Bad=3 0…3 0,3,0,3 2.5.2.17 CTRL.ESSXSWI8 Earthing switch indication (8) Table 137: CTRL.ESSXSWI8 Earthing switch indication (8) IEC 61850 name...

  • Page 62: Ld0.Rescmmxu1 Residual Current (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.3.3 LD0.RESCMMXU1 Residual current (1) Table 140: LD0.RESCMMXU1 Residual current (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.RESCMMXU1 .A.res.instCVal.mag I0_INST Residual current 0.00..40.0 [xIn] 0,40,0,4000 2.5.3.4 LD0.VMMXU1 Voltage measurement (1) Table 141: LD0.VMMXU1 Voltage measurement (1) IEC 61850 name...

  • Page 63: Ld0.Vsmsqi1 Sequence Of Voltage Measurement (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.3.6 LD0.VSMSQI1 Sequence of voltage measurement (1) Table 143: LD0.VSMSQI1 Sequence of voltage measurement (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.VSMSQI1 Sequence of voltages 0.00…4.00 .SeqV.c1.cVal.mag I1_DB -Positive magnitude [xUn] 0,4,0,400 0.00…4.00...

  • Page 64: Ld0.Pemmtr1 Power Measurement And Accumulated Power Values (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.3.10 LD0.PEMMTR1 Power measurement and accumulated power values Table 147: LD0.PEMMTR1 Power measurement and accumulated power values (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.PEMMTR1 .DmdVArh.actVal ER_RV_ACM Forward reactive energy 0…1e10 0,1E10,0,1E10 .DmdWh.actVal...

  • Page 65: Generic Functions

    Section 2 1MRS757807 B DNP3 data mappings 2.5.6 Generic functions 2.5.6.1 LD0.SCA4GAPC1 Multipurpose analog signals (1) Table 151: LD0.SCA4GAPC1 Multipurpose analog signals (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.SCA4GAPC1 .AnOut1.mag AO1_VALUE Analog value 1 -10000...10000 -1E4,1E4,-1E4,1E4 .AnOut2.mag AO2_VALUE Analog value 2...

  • Page 66: Ld0.Sca4Gapc5 Multipurpose Analog Signals (5)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.6.5 LD0.SCA4GAPC5 Multipurpose analog signals (5) Table 155: LD0.SCA4GAPC5 Multipurpose analog signals (5) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.SCA4GAPC5 .AnOut1.mag AO1_VALUE Analog value 1 -10000...10000 -1E4,1E4,-1E4,1E4 .AnOut2.mag AO2_VALUE Analog value 2 -10000...10000 -1E4,1E4,-1E4,1E4 .AnOut3.mag...

  • Page 67: Ld0.Sca4Gapc9 Multipurpose Analog Signals (9)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.6.9 LD0.SCA4GAPC9 Multipurpose analog signals (9) Table 159: LD0.SCA4GAPC9 Multipurpose analog signals (9) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.SCA4GAPC9 .AnOut1.mag AO1_VALUE Analog value 1 -10000...10000 -1E4,1E4,-1E4,1E4 .AnOut2.mag AO2_VALUE Analog value 2 -10000...10000 -1E4,1E4,-1E4,1E4 .AnOut3.mag...

  • Page 68: Ld0.Mvi4Gapc1 Integer Value Moving Function (1)

    Section 2 1MRS757807 B DNP3 data mappings 2.5.6.13 LD0.MVI4GAPC1 Integer value moving function (1) Table 163: LD0.MVI4GAPC1 Integer value moving function (1) IEC 61850 name SA name Description Values Arg 1,2,3,4 LD0.MVI4GAPC1 .ISCS01.stVal OUT1 Interger value 1 +/-2147483647 -max,max,-max,max .ISCS02.stVal OUT2 Interger value 2 +/-2147483647...

  • Page 69: Section 3 Dnp3 Protocol Implementation

    Implementation table and the point list tables, provides a complete configuration/interoperability guide for communicating with a device. Table 165: Device profile document DNP3 device profile document Vendor name: ABB Oy Device name: REC615 Highest DNP level supported: Device function: For requests: Level 2+ ○...
  • Page 70 Section 3 1MRS757807 B DNP3 protocol implementation DNP3 device profile document ○ Sometimes ● Configurable as: "Only when reporting event data", or "When reporting event data or multi-fragment messages" Timeouts while waiting for: Data link ○ None ○ Fixed at ____ ○...

  • Page 71: Dnp3 Implementation Table

    Section 3 1MRS757807 B DNP3 protocol implementation DNP3 device profile document ○ Configurable ○ When device restarts ○ Only certain objects ○ When status flags change ○ Sometimes ○ ENABLE/DISABLE UNSOLICITED No other options are permitted. function codes supported Default counter object/variation: Counters roll over at: ●...
  • Page 72 Section 3 1MRS757807 B DNP3 protocol implementation Table 166: Implementation table OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) Object Variation Function codes Qualifier codes number number Description Function codes (dec) Qualifier codes (hex) (dec) (hex) Binary 1 (read) 00, 01 (start-stop) input –...
  • Page 73 Section 3 1MRS757807 B DNP3 protocol implementation OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) 16-bit 1 (read) 00, 01 (start-stop) 129 (response) 00, 01 (start-stop) 2 (default) analog 06 (no range, or all) 17, 28 (index) input 07, 08 (limited qty) 17, 28 (index) 32-bit...
  • Page 74 Section 3 1MRS757807 B DNP3 protocol implementation OBJECT REQUEST (Library will parse) RESPONSE (Library will respond with) Time delay 129 (response) 07 (limited qty) fine (qty = 1) Not defined Class 0 1 (read) 06 (no range, or all) data Class 1 1 (read) 06 (no range, or all)

  • Page 75: Section 4 Glossary

    Section 4 1MRS757807 B Glossary Section 4 Glossary Application function block library CROB Control relay output block Common time of occurrence. The time and date CTO object is an information object that represents the absolute time of day. DNP3 A distributed network protocol originally developed by Westronic.
  • Page 80 Contact us ABB Oy Medium Voltage Products, Distribution Automation P.O. Box 699 FI-65101 VAASA, Finland Phone +358 10 22 11 +358 10 22 41094 www.abb.com/substationautomation...

Table of Contents