Fitting Diffuser, Wall Insert; Table 36 Tightening Torque (77015) - ABB HT564586 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly
8.13

Fitting diffuser, wall insert

Fitting the diffuser
Figure 51: Fitting the diffuser
Part number A165-L
77015 M5
6 Nm
Table 36: Tightening torque (77015)
1. Attach lifting gear (L) to the diffuser (79000).
2. Carefully place the diffuser on the wall insert (77000), then remove lifting gear.
3. Fit new O-rings (79020, 79021) on the diffuser.
4. Degrease screws (77015) and threaded holes in wall insert.
5. Coat threads of the screws with Loctite® 542.
6. Fit screws.
© Copyright 2016 ABB. All rights reserved.
A170-L A175-L
M6 M8
10 Nm 25 Nm
HZTL4034_EN
A180-L A185-L
M8 M10
25 Nm 45 Nm
Revision F
Page 84 / 111
A190-L
M10
45 Nm
June 2016