Fitting The Filter Silencer; Table 38 Tightening Torque (72004) - ABB HT564586 Operation Manual

Operation Manual / 4 Product description / A100-L
8 Disassembly and assembly
8.14

Fitting the filter silencer

If the turbocharger is also fitted with a noise package, observe chapter Fitting the filter silencer
with noise package [➙ 88].
Figure 54: Fitting the filter silencer
Part number A165-L
72004 M14
130 Nm
Table 38: Tightening torque (72004)
1. Attach the lifting gear to the front lug and rear eyelet of the filter silencer (81000).
2. Position filter silencer on compressor casing.
3. Fit nuts (72004) with washers (72003) and tighten.
Fit insulation as far as necessary.

© Copyright 2016 ABB. All rights reserved.
A170-L A175-L
M16 M18
200 Nm 300 Nm
HZTL4034_EN
A180-L A185-L
M20 M22
420 Nm 570 Nm
Revision F
Page 87 / 111
A190-L
M24
710 Nm
June 2016