Intended Use - ABB HT564586 Operation Manual

Operation Manual / 2 Safety / A100-L, A200-L
1 Safety
1.5

Intended use

Use on internal combustion engines in general
ABB turbochargers are intended for turbocharging internal combustion engines.
The A...-L turbochargers are designed for use on 2-stroke diesel engines.
The turbocharger supplies the engine with the air volume or air/gas mixture and the associat-
ed charging pressure required for operation.
The turbocharger is solely intended to be operated with a clockwise direction of rotation as
viewed from the turbine end.
The specific operating limits of the turbocharger were determined on the basis of information
from the enginebuilder about the intended use. These data are given on the rating plate.
ABB accepts no liability and rejects all warranty claims for any non-intended uses.
Unapproved operation
Any operation of the turbocharger outside of its operating limits can be haz-
ardous to personnel.
WARNING
Only operate the turbocharger within its operating limits.

Only trained personnel must operate the turbocharger.

The intended use of the turbocharger includes compliance with all regulations and conditions.
In particular, the following must be observed:
 Operation Manual
 Instructions of the enginebuilder
State of the art
The turbocharger is designed and manufactured according to the state of the art and is safe to
operate.
Perfect condition
The turbocharger must only be used when it is in a technically flawless condition and operated
in compliance with its intended use.
ABB excludes any liability for damage resulting from unauthorized modifications to the turbo-
charger or improper operation.
© Copyright 2016 ABB. All rights reserved.
HZTL4024_EN
Page 5 / 17
Revision C
August 2016