ABB HT564586 Operation Manual page 26

Operation Manual / 2 Safety / A100-L, A200-L
1 Safety
Mechanical hazards when working on the turbocharger
Physical hazards due to rotating parts
The rotor can rotate due to the stack draught alone. Contact with rotating
parts can cause severe injury.
WARNING
Secure rotor against turning.

Mechanical hazards
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
WARNING
cedures.
Observe the general rules for occupational safety and prevention of acci-

dents.
Ensure workplace safety.

Only perform operations that are described in this document.

Only perform operations for which you have previously received instruc-

tion or training.
Hazards due to operating materials and supplies
Operating materials and supplies are substances required for the operation of the turbo-
charger or for the performance of maintenance work. Oils, greases, coolants, detergents and
solvents, acids and similar substances can be classified as hazardous substances.
Handling operating materials and supplies
Swallowing or inhaling vapours of operating materials and supplies or con-
tact with them may be harmful to health.
WARNING
Do not breathe in these substances and avoid contact with the skin.

Ensure proper ventilation.

Observe the information in the material safety data sheet for the operating

materials and supplies.
Wear personal protective equipment (PPE) according to the material safe-

ty data sheet.
Comply with local legislation.

Wear safety goggles.
Wear safety gloves to protect against chemical hazards.
Wear a respiratory mask to protect against gases.
© Copyright 2016 ABB. All rights reserved.
HZTL4024_EN
Page 16 / 17
Revision C
August 2016