Advertisement
118
Installation
Cable Installation
Note: For more information about cleaning optical connectors, refer to
LC End Surface Cleaning
and
End Surface
Cleaning In
LC.
Step 8
Insert the optical cables into the SFP that is pre-positioned in the connector of the RU.
Figure 35
Insert Optical Fiber
Step 9
Ensure the locking latches of the LC fiber connectors are snapped into position.
Step 10
Align the connector key on connector to the connector on the RU and insert the connector.
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0
Advertisement
