Advertisement
120
Installation
Cable Installation
Figure 38
Secure Enclosure
Step 12
Mate the two protective covers together to keep the covers intact and clean.
Step 13
Apply weatherproofing to the SFP cable connector per local guidelines to protect from moisture intrusion.
Note: Fujitsu recommends using industry standard UL approved self-fusing tape, but users may use any UL
approved weatherproofing material. Refer to
Weatherproofing RU Connections
for more information about
weatherproofing methods.
Continue with the next task.
4.6.3
Connect AISG Cables
This procedure describes how to connect AISG cables to the RU.
Prerequisites:
■ RU mounted and not powered up
■ Available AISG cables
■ Weatherproofing method to prevent moisture intrusion
Step 1
Remove the protective cover from the RET port.
Fujitsu and Fujitsu Customer Use Only
·
Issue 1.1, May 2021
Release 1.0
Advertisement
